.

State Wants Feedback on $2.2 Million Rotary Project

The project would enhance sight lines at the rotary on the Seymour-Oxford line, according to the DOT.

 

Anyone who wants to let the state know its position on a new $2.2 million reconstruction of the rotary at Routes 188 and 334 and Holbrook Road on the Seymour-Oxford line will have that opportunity soon. 

The Connecticut Department of Transportation will conduct a public informational meeting concerning the proposed improvements on Wednesday, Feb. 6, in the Community Center Meeting Room, Seymour Community Center, 20 Pine St., Seymour.  An informal question and answer session will begin at 6:30 p.m. followed by a formal design presentation at 7 p.m.

 The primary purpose of this project - State Project No. 124-162 - is to enhance safety at the rotary type intersection and improve sightlines.

"Although the existing intersection has many of the features of a modern roundabout design, like the grass splitter islands and a grass center island, the alignment on several of the approaches have minimal deflection resulting in high operating speeds," according to a DOT news release. "Modern roundabout designs are most effective when motorists travel at lower operating speeds." 

 The proposed project will upgrade the existing four-leg rotary intersection to a modern type roundabout.  The approach geometry will be modified and the splitter islands will be raised and lengthened to channelize traffic into a more deflected pattern.  The center island will also be raised and landscaped to increase visibility from the approaches.  Additionally, the profile on Route 334 will be lowered to improve sightlines.  These improvements, along with new signing, are intended to gradually slow vehicles down to the lower speeds of the circulating traffic, resulting in a safer intersection.  The realignment of the approaches and the new splitter islands will require full depth reconstruction.  Work within the circle of the roundabout will include the construction of a concrete truck apron and re-grading of the center island.  The extent of the pavement work required in the circle will be determined based on cross-slope and drainage considerations.  Utility relocations appear likely at this time to accommodate the realignment of the approaches, and illumination of the roundabout will be considered.

Construction is anticipated to begin in spring 2015 based on the availability of funding.  The estimated construction cost for this project is approximately $2.2 million.  This project is anticipated to be undertaken with 100 percent State funds.

The Public Informational Meeting is being held to afford a full opportunity for public participation and to allow open discussion of any views and comments the community may have concerning this proposed project. 

The meeting facility is ADA accessible.  Language assistance may be requested by contacting the Department of Transportation's Office of Communications (Voice only) at (860) 594-3062 at least five working days prior to the meeting.  Language assistance is provided at no cost to the public, and efforts will be made to respond to requests for assistance.

Plans of the proposed project will be on display for public review.  Department personnel will be available during the meeting to discuss this project.  More detailed information is available at the Department’s Office of Engineering, 2800 Berlin Turnpike, Newington, Connecticut, Monday through Friday between the hours of 8:30 a.m. and 4 p.m., excluding holidays.  Anyone wishing to discuss the project may contact Mr. Timothy M. Wilson at (860) 594-3189 or by e-mail at Timothy.Wilson@ct.gov. Plans are also available for review at the Seymour Town Hall.

The above news release comes from the Connecticut Department of Transportation.

 

Abe January 26, 2013 at 01:22 AM
Considering how badly most drivers handle stop signs these days, the rotary is the way to go. I like the idea of a light at 34 and 188. I've seen plenty of accidents there.
Craig Zac January 26, 2013 at 01:29 AM
I emailed channel 8 news about this... maybe theyd also be interested in why the state raises our taxes cause they are almost broke yet see no problems in dropping 2.2 million to make a new rotory because the old one wasnt working.... what do they think will happen at the new one? people will not go straight through it without yeilding to oncoming traffic already in the circle? lol... a 2.2 million dollar joke by the state DOT!
Chris Alonzo January 30, 2013 at 07:13 PM
A 4-Way Stop is better than a rotary in my opinion. And much cheaper.
Craig Zac January 30, 2013 at 07:26 PM
Still havent heard back from Channel 8 news about this... anyone else wanna give them a shout? maybe if a few of us do, they will respond? just give them the likn to this story here on patch.
Craig Zac January 30, 2013 at 07:30 PM
i like it too Abe but not rebuilding it for $2.2 million... thats just crazyness... our state is in a financial ditch and all our taxes are so high half of us cant heat our homes and the DOT wants to drop 2.2million $$ on a dumpy little rotory in Oxmour? doesnt that just sound like.... nuts? I know these State employees need to work like the rest of us but, this ust isnt cool... i could go down there with 3 more guys, a truck load of Asphault and some shovles and make 4 speed bumps that will do the same exact thing!!

Boards

More »
Got a question? Something on your mind? Talk to your community, directly.
Note Article
Just a short thought to get the word out quickly about anything in your neighborhood.
Share something with your neighbors.What's on your mind?What's on your mind?Make an announcement, speak your mind, or sell somethingPost something
See more »